15 Samosett Street, Holyoke, MA 20,500 sq. ft. 2 loading docks

Truck - 1998 Freightliner FL70, 24’ box Clark 3,000 lb. forklift 5 ea./5,000 lb. capacity pallet jacks 5 ea./5,000 lb. turntables Overhead bridge crane - 1/2 ton

Conveyor Line One:
RAPID FLEX CONVEYOR - 550', with a 3" enclosed track, 3-11 FPM
Ramco three-stage stainless steel iron phosphate spray washer, 3' x 5' parts opening
Dry-off oven, 12' W x 32' L, gas fired, dual pass, 10 min. dwell time at 6 FPM
Ramco powder booth, stainless steel, 3' W x 5' H parts opening, 8,000 CFM fan
Bake oven, 32' x 30', gas fired, 450 degrees max. temperature, 20 min. dwell time at 6 FPM
Burn-off oven for fixture stripping, Bayco Model 78
Digi Lube programmable chain oiler

Conveyor Line Two:
(1) TFG-A/M 4800 CFM stainless steel down-draft powder booth, overall dimensions: 8’6” W x 7’10” H x 19’4 1/2" L, opening 36” x 36”
ONODA powder gun system - GXM5000M; (4) Model 506 automatic guns with patented “Ring & Pin” charging device
Bake oven (approximate dimensions), parts opening 36” W x 36” H
Exterior: 39’ L x 7’ W x 6’4” H, plus 2’ legs for overall height of 8’4”(excluding blowers). IR heated length: 30’

JBI powder booth, 12’ W x 8’ H x 12’ D
Nordson powder booth, 5’ W x 5’ H x 5’ D
(2) Batch ovens
     -6’ W x 7’ H x 6’ D, 650 degrees max.
     -8’ W x 8’ H x 20’ D, 500 degrees max.
Two-stage cabinet washer; 8’ diameter turntable, 8’ inside work height, 2,000 lb. load cap.
Powder guns
     -(2) Nordson Sure Coat, PCF Model 401
     -ONODA Model GX 304
     -Binks Sames Model GCM 2000
     -(2) Ransberg Model 701

Pad printer Tosh Model, Logicia 150, 130mm sealed cup machine, 4 color capability
AMI exposure unit for screens up to 60” x 30”
Artwork done in CorelDRAW 10
Dark room 10’ x 20’

Atlas Copco GA-15, 20hp with integrated air dryer
Ingersoll-Rand 30hp
Zeks therm refrigerated air dryer